# For Providers

Source: https://docs.qvoice.net/desk-center/for-providers/

If you sell QVOICE Platform to other people, Desk Center is something you **give** an account — along with how much disk its files may use and how long it may keep them. All three live in one place in the admin portal, and none of them is visible to the account itself.

**Configuration → Tenant Accounts →** the account **→ Desk Center**

On the **Tenant Accounts** list, that is the **Desk Center** circle in the account's Features column.

## The switch

**Enabled** gives the account Desk Center: the boards, the work items, the CRM and the cases. It is **off** by default — this is a product being sold, not a surface every account already has.

Switched on, the account's administrators and agents find Desk Center in their sidebar on their next load. Nothing else needs doing: the account starts with a sample board so that nothing is empty on the first open.

**You decide the entitlement, they decide who uses it:**

Giving an account Desk Center does not say which of their people may see which board. That is their administrator's decision, inside Desk Center — see [Who Sees What](https://docs.qvoice.net/desk-center/permissions/).

## Embedded Softphone

**Embedded Softphone** puts the softphone **inside** Desk Center: the agent takes and places calls in a panel beside the case they are working on, instead of keeping UCP open in another tab. It is **off** by default, and it can only be switched on for an account that has **Enabled** above — a phone inside a product the account does not have is nothing, and the switch is greyed out until you give them Desk Center.

**Your agents are signed out of UCP:**

This is the part to decide before you switch it on. QVOICE Platform allows **one softphone session per person**, and the newest one wins. An agent on this account who opens Desk Center is therefore **signed out of UCP**, with the message *"New session detected"*.

That is the platform working as designed, not a fault — it is what stops one person's calls ringing in two places. But it means the account is choosing **where its agents work**: in Desk Center, or in UCP. Not both at once.

Switched on, agents on that account find a **Phone** panel down the right-hand side of Desk Center on their next load. They are signed in to it automatically; there is no second password. They can hide the panel to get the width back, and hiding it does **not** hang up, sign them out or stop the phone ringing — see [For Agents](https://docs.qvoice.net/desk-center/for-agents/#the-phone-beside-the-case).

An administrator who is **acting as** one of the account's users does not get the phone, deliberately: registering it as somebody else would take that person's phone off them mid-call.

**The switch is not the same as the install:**

**Embedded Softphone** says this *account* has the phone. The softphone itself is a component of the cluster, and it has to be deployed there. Switch this on for an account on a cluster that does not have it and the agent is told *"The phone is not installed here"* — a clear message rather than a broken panel, but still no phone. If your agents see it, the cluster needs the softphone deployed.

Desk Center itself also has to be recent enough. The **Phone** panel was added in Desk Center **0.23.0**: on a cluster still running an earlier Desk Center the switch can be saved and stays on, but agents see **no panel and no message** at all. The version is in Desk Center's footer; if it is older than 0.23.0, the cluster needs Desk Center upgraded.

## Customer tickets

**Customer tickets** lets the account's own customers open support tickets with it from **Support** in their portal, and puts those tickets on a **Customer tickets** board in the account's Desk Center. It is **off** by default.

The switch is only shown for a **reseller account** — an account that has customers of its own below it — and it is greyed out until **Enabled** above is on, because the tickets land on a Desk Center board.

Switching it on prepares the account's board before anything is saved. If Desk Center cannot do that, the modal says *"Could not switch Customer tickets on: Desk Center did not answer. Nothing was saved."* and nothing changes; try again in a moment.

Switching it off — or switching Desk Center off — deletes nothing. Customers who already have tickets keep **Support** in read-only mode: they can read their tickets but cannot open new ones or reply. Customers who never opened one no longer see Support.

What the account and its customers do with it is described in [Customer Tickets](https://docs.qvoice.net/desk-center/customer-tickets/).

## Attachment Limit (MB)

How much the account's attachments may add up to. Attachments are stored on the cluster, so **this is the disk you are handing out**.

| What you type | What it means |
| --- | --- |
| a number | that many megabytes, and uploads are refused past it |
| **0** | this account may attach nothing at all |
| **empty** | follow the cluster's own limit, set in Desk Center's configuration file |

Empty and zero are **not** the same answer, and the field keeps them apart deliberately. An empty box hands the decision back to the deployment; a zero is a decision.

Above the field you also see **what the account has already stored**. It is the same number its own administrators see, shown here because your action is the different one: raise the limit, or decide not to.

- With a limit set, a **bar** and both figures — *"400 MB of 1000 MB stored"* — from the first byte, so you can judge the number you are about to type against it.
- With no limit and something stored, the figure **without a denominator**. The limit in force is then the cluster's own, which lives in Desk Center's configuration file; the portal does not read it and will not invent one.
- With nothing stored at all, it says so. An empty space would be indistinguishable from a screen that failed to load the counter.

### What your own provider allows you

If your account was itself given a limit, you cannot hand out more than you were given. The field then states the maximum under it — *"Maximum 15000 MB, inherited from this account's reseller"* — and refuses a larger number before it is saved.

The ceiling is checked against **the account's own provider**, not against whoever is editing. A limit raised on a grandchild account is held to what that account's own provider has, which is what keeps the rule meaningful more than one level down.

Three cases have **no** ceiling, and they look the same on screen: a top-level account, a provider that was never given a limit of its own, and the rare case where that provider's record cannot be read. In all three the field is simply unbounded.

**A ceiling is per account, not a pool:**

If you have 15 GB, each of your accounts may be given up to 15 GB — ten of them is 150 GB promised. The ceiling stops any one account from being given more than you have; it does not add up what you have given out. Watch the usage figures.

## Retention (days)

The longest the account may keep attachments before they are deleted automatically.

| What you type | What it means |
| --- | --- |
| a number, **31 or more** | files on work closed longer ago than that are deleted |
| **empty** | nothing is ever deleted automatically |

This is the opposite default from the limit above it, and on purpose: the worst case of a missing limit is a refused upload, and the worst case of a guessed retention is somebody's evidence gone.

The account's own administrator can choose to delete **sooner**, never later: the shorter of the two numbers is the one applied. If they have chosen nothing, **your number is what runs** — so a retention set here is not only a ceiling, it is the schedule until they set their own.

Below 31 days nothing is accepted, which is the same floor call recordings defend.

The deletion runs on its own, account by account, against **when the work closed**. It leaves the work items and the note saying a file was attached. Only the file goes, and it cannot be recovered.

## Seeing which accounts are filling up

You do not have to open a modal per account to find out. On the **Accounts** list itself, the **Desk Center** circle in the Features column says how that account is doing:

| The circle | What it means |
| --- | --- |
| green | Desk Center is on, and either has room or has no limit set |
| **amber** | **80 % or more** of its limit is used |
| **red** | the limit is reached — the account cannot attach anything else |

Hover it for the figures: *"Desk Center — 86 % of 1000 MB"*. Clicking it opens the same modal described above, which is where you would raise the number.

**On this list, green means enabled:**

It does not mean healthy. An account at 86 % is still enabled — the amber is saying something else about it, on the same circle.

### The filter

Beside the name and status filters there is a **Desk storage** one:

| Option | What it finds |
| --- | --- |
| **Any** | everything (the default) |
| **Over 80 %** | the accounts the amber and red circles mark |
| **Full** | only the accounts that can no longer attach anything |
| **No limit set** | accounts with Desk Center and no limit of their own |

The last one is not an alarm. **An account with no limit has no percentage** — it follows the cluster's own number, which the portal deliberately does not read — so it can never be marked and can never appear under the first two. That option is the only way to find those accounts, and until you start setting limits it is where all of them are.

Accounts that do not have Desk Center at all never appear under any of these.

## Your own account: Admin account features

An account never configures its own Desk Center — that is what its provider sells it. The one account with no provider above it is the platform's **admin account**, the one every other account sits under. Its own features are switched on from the **Admin account features** block on its Tenant Accounts page, on the Accounts search row, to the right of **Get**:

**Configuration → Account → Tenant Accounts → Admin account features →** the **Desk Center** chip

The chip opens the same modal described on this page, for the admin account itself — which is where its **Desk Center** and its **Customer tickets** are switched on. The block is shown only to a super admin working in the admin account; see [Customer Accounts](https://docs.qvoice.net/admin/customer-accounts/#your-own-account).

## What this does not control

- **Which boards, columns, fields or automations** the account has. Those are theirs — see [Initial Setup](https://docs.qvoice.net/desk-center/initial-setup/).
- **Who in the account sees which board.** Also theirs — see [Who Sees What](https://docs.qvoice.net/desk-center/permissions/).
- **The per-file limit**, which is a fixed 20 MB everywhere.
- **Whether the account has UCP at all.** **Embedded Softphone** decides whether Desk Center *shows* a phone; whether that phone can register is the account's own telephony, which is configured elsewhere.
