Analytics Hub — Reports Documentation¶
This document describes all reports available in the Analytics Hub application. It is intended for technical users of the platform and explains what each report shows and what every field represents.
Overview¶
Account Summary¶
Description: The account's calls at a glance for the selected date range: inbound and outbound totals, how many were answered or missed, and how missed calls were followed up. It is the first entry in the sidebar, under Overview. Ranges of up to 400 days can be selected.
Summary metrics (cards):
| Card | Description |
|---|---|
| Total Calls | Inbound plus outbound calls. |
| Inbound Calls | Calls received from outside the platform, with their share of Total Calls. Underneath: how many unique numbers called. |
| Outbound Calls | Calls placed to outside the platform, with their share of Total Calls. Underneath: how many unique numbers were dialed. |
| Inbound Answered | Inbound calls that were not missed, with their share of Inbound Calls. Inbound Answered plus Missed Calls always equals Inbound Calls. |
| Outbound Answered | Outbound calls that ended normally or had billed time, with their share of Outbound Calls. |
| Missed Calls | Missed inbound calls, with their share of Inbound Calls. Same count as the Missed Calls report. Underneath: how many unique numbers had a call missed. |
| Followed Up | Missed calls that were followed up, with their share of Missed Calls. |
| Follow In | Follow-up calls where the customer called back. |
| Follow Out | Follow-up calls where an agent called the customer. |
Follow In and Follow Out count follow-up calls, not missed calls, so together they can be higher than Followed Up.
Unique numbers count each caller (or dialed number) once, however many calls it made. A number written in national format and the same number in international format (for example 0778310177 and +94778310177) count as one. Anonymous or withheld callers are not counted as unique numbers, though their calls are still counted in the cards.
Note
Inbound Answered is Inbound Calls minus Missed Calls. The Inbound Calls report decides "answered" from the hangup cause instead, so a call that only reached an IVR and cleared normally counts as answered there; its figure can be higher.
Call Volume chart: Inbound and outbound calls over time, with one line per outcome: Inbound answered, Inbound missed, Outbound answered and Outbound unanswered. Hovering a point shows the four counts and their total for that period.
The selector above the chart groups the calls by:
| Grouping | Available for ranges up to |
|---|---|
| 5 min | 7 days |
| 15 min | 31 days |
| Hour | 31 days |
| Day | Any range |
The chart opens by hour for ranges up to 48 hours and by day for longer ones. Periods follow the selected timezone, including zones with a half-hour offset.
Zoom: When the grouping has more than 48 periods, a zoom bar under the chart shows the whole range in miniature. Drag the highlighted window to move along the range, or drag its edges to widen or narrow it; the chart and its vertical scale follow the window. A grouping with more than 576 periods (for example 5 min over more than 48 hours) opens on its latest 576 periods.
Outcome charts:
- Inbound Calls — inbound calls answered vs missed.
- Outbound Calls — outbound calls answered vs unanswered.
- Missed Call Follow-Up — missed calls followed up vs not followed up, with the Follow In and Follow Out counts underneath.
Every chart can be switched to a table and downloaded as CSV. The Call Volume CSV has one row per period of the grouping shown, with the four outcome columns and the total.
If part of the selected period cannot be read, a notice says the figures are partial; try again or pick a shorter range.
Activity Reports¶
Users Activity¶
Description: User activity analysis and performance metrics. Aggregates call statistics per user (extension) for the selected date range. Optionally filter by call type: All Calls, Internal Only, or External Only.
Summary metrics (dashboard):
| Metric | Description |
|---|---|
| Total Users | Number of distinct users (extensions) with activity in the period. |
| Total Calls | Sum of all calls (inbound + outbound) for all users. |
| Inbound Calls | Total number of inbound calls. |
| Outbound Calls | Total number of outbound calls. |
Detailed data — table columns:
| Column | Description |
|---|---|
| User | Display name or extension of the user. Links to a drill-down view. |
| Total Calls | Total number of calls (inbound + outbound) for this user. |
| Inbound Calls | Number of inbound calls received by this user. |
| Inbound Answered | Number of inbound calls that were answered. |
| Inbound Talk Time | Total time spent in conversation on inbound calls (HH:MM:SS). |
| Inbound Avg | Average duration of inbound talk time per call. |
| Inbound Duration | Total duration of inbound call legs (including ringing). |
| Outbound Calls | Number of outbound calls placed by this user. |
| Outbound Answered | Number of outbound calls that were answered. |
| Outbound Talk Time | Total time spent in conversation on outbound calls. |
| Outbound Avg | Average duration of outbound talk time per call. |
| Outbound Duration | Total duration of outbound call legs. |
All Calls¶
Description: Every call your users took part in, queue calls and direct calls together, for the selected date range. The Count switch at the top picks the unit the report counts in:
- By user: one row per user. A queue call that rang three agents counts once for each of them. Use it to see how much each person handled.
- By call: one row per customer call, however many agents it rang. Use it to see how many customers called and how many were answered.
All Calls counts calls from your users' side. It lists a call once that call has rung at least one user of the account, either through a queue or directly. Calls that never rang a user are not in this report, for example a caller who hung up in the menu or in the queue before any agent was rung, or a call the auto attendant or voicemail handled on its own. The Inbound Breakdown report counts those calls too. See Comparing All Calls with Inbound Breakdown.
A call counts as answered only when it connected, that is, when it has connected (billed) time. An outbound call that the carrier rejected or that was never picked up is unanswered, whatever hangup cause it ended with (for example NORMAL_UNSPECIFIED). For a call placed through the carrier, the connected time is taken from the carrier's leg, the same one Outbound Calls and Outbound Breakdown read.
Filters:
| Filter | Options |
|---|---|
| Count | By user, By call. |
| Type | All Calls, Queue, Direct. A queue call is one that reached the user through a call center queue; a direct call is any other call. |
| Direction | Any, Inbound, Outbound. |
| Network | All Networks, On-net, Off-net. A call is off-net when any of its legs went through a carrier (to or from an outside number), and on-net otherwise. A call that went to the carrier counts as off-net even when the carrier rejected it straight away. |
| Queue | Shown when Type is Queue: limits the report to the queues you pick. |
| Queue call attempts | Shown when Type is Queue. One entry per call counts each agent once per queue call, however many times the queue rang that agent. Every attempt counts every ring separately. |
| Only count a queue call for the agent who answered it | Shown with the queue filters (By user). A queue call that rang several agents normally counts for each of them: answered for the agent who took it, missed for the others. With this on, the call counts only for the agent who answered it. A call nobody answered still counts as missed for every agent it rang. |
| Add OR group | Adds another set of Type / Direction / Network filters. A call is included when it matches any of the groups. |
Note
After you change the dates or any filter, press Apply. The cards, charts and table refresh only then.
By user¶
The summary has two groups of cards, each under its own title, so the two ways of counting sit side by side.
By agent · each agent's share: the calls as each user saw them. A queue call counts once for every agent it rang, so these add up to more than the calls received.
| Card | Description |
|---|---|
| Total Users | Users of the account with activity in the period. |
| Total Calls | Calls counted per user. One queue call can count for several agents. |
| Total Answered Calls | Calls the user answered, with their share of Total Calls. |
| Queue Offers | Queue calls offered to the users: once for every agent a queue call rang. |
| Direct Calls | All other calls. |
| Inbound Calls | Calls the users received. |
| Outbound Calls | Calls the users placed. |
| Inbound Answered % | Share of inbound calls the user answered. The count is shown underneath. |
| Missed Rings % | Share of inbound calls the user did not answer, once for every agent an unanswered call rang. For a queue call, the user missed it when the queue rang them and they did not pick up, even if another agent answered it (unless Only count a queue call for the agent who answered it is on). |
| Outbound Answered % | Share of outbound calls the other party picked up. |
By call · unique calls: the same calls counted once each, however many agents they rang. These are the numbers Count = By call shows for the same filters, so you can tally against other reports without switching.
| Card | Description |
|---|---|
| Customer Calls | Every call once. |
| Answered | Calls someone answered, with their share of Customer Calls. |
| Queue Calls | Queue calls that rang at least one agent. With Direction = Inbound and Network = Off-net, this equals Queue calls that rang an agent in Inbound Breakdown. |
| Queue Answered | Queue calls an agent answered, with their share of Queue Calls. |
| Direct Calls | Calls that rang a user directly. |
| Direct Answered | Direct calls that were answered, with their share of Direct Calls. |
| Inbound Calls | Calls received. |
| Inbound Answered | Inbound calls that were answered, with their share of Inbound Calls. |
| Outbound Calls | Calls placed. |
| Outbound Answered | Outbound calls that connected, with their share of Outbound Calls. |
Detailed data — table columns: User, Extension, Tags, Total Calls, Total Answered, Queue Offers, Queue Answered, Direct Calls, Direct Answered, Inbound Calls, Inbound Answered, Inbound Answered %, Missed Rings, Missed %, Outbound Calls, Outbound Answered, Outbound Answered %, Transfer Rate, Queue Transfers Received, Direct Transfers Received, talk time and duration columns, and the agent state times (Login Time, On Call Time, Idle Time, Wrap Up Time, Hold Time, Not Available Time, DND Time, AHT, ART). Each row opens the list of that user's calls.
Downloads: CSV and PDF.
By call¶
Summary metrics (cards):
| Card | Description |
|---|---|
| Customer Calls | One per call, however many agents it rang. |
| Answered | Calls someone answered. A queue call is answered when an agent took it; a direct call when the user picked up. |
| Unanswered | Calls nobody answered. |
| Queue Calls | Queue calls that rang at least one agent. |
| Direct Calls | Calls that rang a user directly. |
| Rang Several Agents | Queue calls offered to more than one agent. These calls are what make the By user totals larger than By call. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Time | When the call started (for a queue call, the first time an agent was rung). |
| Direction | Inbound or outbound. |
| Type | Queue or Direct. |
| Queue | The queue, for queue calls. |
| Number | The other party's number. |
| Answered by | The user who took the call. For a queue call it is the first agent who answered; a later agent received it as a transfer. |
| Agents Rung | How many different agents the queue rang for this call. |
| Talked | Talk time. |
| Result | Answered or Unanswered. |
Download: CSV.
Example: the same calls counted both ways¶
A customer calls the Sales queue. The queue rings Ann, who does not answer, then rings Ann again, then rings Ben, who answers.
| View | What it shows |
|---|---|
| By user | Ann: 1 call, missed. Ben: 1 call, answered. Total Calls = 2, Total Answered Calls = 1. |
| By user, Queue call attempts = Every attempt | Ann: 2 attempts, both missed. Ben: 1 attempt, answered. |
| By call | 1 customer call, answered by Ben, Agents Rung = 2, counted in Rang Several Agents. |
Compare with other reports¶
Under the cards, in both count modes, Compare with other reports lines All Calls up against Inbound Breakdown and Outbound Breakdown for the applied date range. Press Compare to load it; it reads the three reports, so it does not load on its own. The All Calls side always counts by call, calls through the carrier (off-net), whatever filters the report has.
| Line | Compared with | Relation |
|---|---|---|
| Inbound queue calls | Inbound Breakdown · Queue calls that rang an agent | The same calls: the numbers must be equal. |
| Inbound calls | Inbound Breakdown · Total inbound | Different by design. All Calls only has calls that rang a user; Inbound Breakdown also counts the calls abandoned in a queue before any agent rang and the calls ended or answered in the callflow. The line gives those numbers. |
| Outbound calls | Outbound Breakdown · Total outbound | The same calls: the numbers must be equal. |
| Outbound answered | Outbound Breakdown · Answered | The same rule: a call is answered when it has connected time, read from the carrier's leg in both reports. They should be equal. |
A line that must be equal shows Same calls when it is, and the difference when it is not.
DIDs Activity¶
Description: DID (Direct Inward Dialing) numbers activity and usage statistics. Shows call metrics per phone number (DID) for the selected period.
Summary metrics:
| Metric | Description |
|---|---|
| Total DIDs | Number of distinct DIDs with activity. |
| Total Calls | Sum of all calls on all DIDs. |
| Inbound Calls | Total inbound calls to DIDs. |
| Outbound Calls | Total outbound calls from DIDs. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Phone Number | The DID number. Links to a drill-down view. |
| Total Calls | Total calls (inbound + outbound) for this DID. |
| Inbound Calls | Inbound calls to this DID. |
| Inbound Answered | Inbound calls answered. |
| Inbound Talk Time | Total talk time on inbound calls (formatted). |
| Inbound Avg | Average inbound talk time per call. |
| Inbound Duration | Total inbound call duration. |
| Outbound Calls | Outbound calls from this DID. |
| Outbound Answered | Outbound calls answered. |
| Outbound Talk Time | Total talk time on outbound calls. |
| Outbound Avg | Average outbound talk time per call. |
| Outbound Duration | Total outbound call duration. |
Callers Activity¶
Description: Caller behavior analysis and trends. Aggregates statistics by caller identifier (caller ID number) so you can see which external callers are calling and how much time they spend.
Summary metrics:
| Metric | Description |
|---|---|
| Total Callers | Number of distinct callers. |
| Total Calls | Sum of all calls from those callers. |
| Inbound Calls | Total inbound calls (from these callers). |
| Outbound Calls | Total outbound calls (to these callers). |
Detailed data — table columns:
| Column | Description |
|---|---|
| Caller | Caller identifier (e.g. phone number). Links to drill-down. |
| Total Calls | Total calls involving this caller. |
| Inbound Calls | Inbound calls from this caller. |
| Inbound Answered | Inbound calls answered. |
| Inbound Talk Time | Total inbound talk time. |
| Inbound Avg | Average inbound talk time. |
| Inbound Duration | Total inbound duration. |
| Outbound Calls | Outbound calls to this caller. |
| Outbound Answered | Outbound calls answered. |
| Outbound Talk Time | Total outbound talk time. |
| Outbound Avg | Average outbound talk time. |
| Outbound Duration | Total outbound duration. |
DND Activity¶
Description: Do Not Disturb (DND) activity and preferences. Shows how often users enable DND and how long they stay in DND state.
Summary metrics:
| Metric | Description |
|---|---|
| Total Users | Number of users with at least one DND event. |
| Total DND Events | Total number of times DND was activated. |
| Total DND Time | Sum of all time spent in DND (formatted, e.g. days/hours). |
| Avg DND Time | Average time in DND per user. |
Detailed data — table columns:
| Column | Description |
|---|---|
| User | Username. Links to drill-down. |
| Extension | User extension number. |
| DND Count | Number of times DND was turned on in the period. |
| DND Time | Total time the user spent in DND state. |
| Avg DND Time | Average duration per DND session. |
Faxes Activity¶
Description: Fax transmission activity and statistics. Lists all faxes (inbox and outbox) in the date range with direction, success/failure, and page count.
Summary metrics:
| Metric | Description |
|---|---|
| Total Faxes | Total number of faxes in the period. |
| Inbound | Number of inbound faxes (received). |
| Outbound | Number of outbound faxes (sent). |
| Successful | Number of faxes that completed successfully. |
| Success Rate | Percentage of faxes that succeeded. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Created Time | When the fax was created (in selected timezone). |
| Username | User associated with the fax. |
| Direction | Inbound (inbox) or Outbound (outbox). |
| From | Sender identifier (e.g. number or name). |
| To | Recipient identifier. |
| Pages | Number of pages (from result metadata). |
| Result | Success or Failed (from fax result). |
Meetings Activity¶
Description: Meeting activity tracking and moderator insights. Lists meetings created in the period with creation time, moderator, and links to open or copy the meeting URL.
Summary metrics:
| Metric | Description |
|---|---|
| Total Meetings | Number of meetings in the period. |
| Unique Moderators | Number of distinct users who created meetings. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Creation Time | When the meeting was created (timezone-formatted). |
| ID | Meeting identifier (short ID from backend). |
| Moderator | User who created the meeting (resolved from owner_id). |
| Actions | Buttons to copy the meeting link or open it in a new tab. |
Call Center Reports¶
Agents Activity¶
Description: Call center agents performance and activity monitoring. Per-agent stats: calls offered/answered, time on call, time to answer, login time, idle, wrap-up, hold, not available, and DND.
Summary metrics:
| Metric | Description |
|---|---|
| Total Agents | Number of agents in the report. |
| Total Calls | Total calls offered to agents. |
| Abandoned/Declined Calls | Calls not answered. |
| Avg Answer Rate | Overall percentage of calls answered. |
| Avg Time To Answer | Average time (e.g. MM:SS) until agents answer. |
| Agent Effort Score | Composite score (0–100) based on call volume, duration, answer rate, and response time. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Name | Agent display name. |
| Extension | Agent extension. |
| Tags | Tags assigned to the agent (e.g. skill groups). |
| Total Calls | Total calls offered to this agent. |
| Answered Calls | Calls answered by this agent. |
| Answered (%) | Percentage of offered calls that were answered. |
| On Call Time | Total time the agent spent on calls. |
| On Call Avg | Average call duration. |
| Time to Answer Max | Maximum time (seconds) to answer a call. |
| Time to Answer Avg | Average time to answer. |
| Login Time | Total time the agent was logged in. |
| Idle Time | Time in idle state. |
| Wrap Up Time | Time in wrap-up after calls. |
| Hold Time | Time with callers on hold. |
| Not Available | Time in “not available” status. |
| DND Time | Time in Do Not Disturb. |
Filters: Queue (optional), Direction (All / Inbound / Outbound), Tags, and text filters for name, extension, and various metrics.
Agents Status Activity¶
Description: Real-time agent status tracking and availability metrics. Focuses on how much time agents spent in each state: registered (login), not available (broken down by status), wrap-up, and hold.
Detailed data — table columns:
| Column | Description |
|---|---|
| Name | Agent name. |
| Extension | Agent extension. |
| Login Time | Total time registered/logged in. |
| Not Available Time | Total time in any “not available” state. |
| Wrap Up Time | Time in wrap-up. |
| Hold Time | Time with callers on hold. |
| (Subrows) | Per-status breakdown of “not available” time (e.g. Break, Lunch), counted only while the agent is logged in. It includes a state that logged the agent out of their queues. Clicking Custom States lists the same stays, so the list adds up to these totals. |
Filters: Queue selector (All or specific queue).
Status History¶
Click an agent's Name to open Status History —
- Statuses: Available, On Call, Hold, Wrap Up, Not Available, DND, Logged Out and No Data, as the queue service recorded them. When two statuses overlap, only the one that wins is listed. Custom agent states are not listed by name: a state of type Not Available is shown as Not Available, and one of type Available as Available. Each custom state by name is in the Custom States drill-down, which includes a state that logged the agent out of their queues.
- Totals and filter: above the list, one chip per status shows the total time and how many times the agent was in it. Click a chip to show only that status; click more chips to add them. The totals always cover the whole period.
- Download: the CSV button downloads the rows on screen, in the selected timezone.
The list also shows the agent's softphone sessions. A session is one softphone, not the agent's status: they are not counted in the status totals and get chips of their own (with a count only).
| Status | When it appears |
|---|---|
| Session Start | The agent's softphone started a session: the QVOICE Platform web or desktop app, or the embedded softphone a CRM loads. End and Duration show when and how the session ended. Both show “—” while the session is still open, or when it was closed without signing out (a closed tab or window, a CRM page that removed the softphone). |
| Session Replaced | The softphone signed the agent out with “New session detected”, because a newer session of the same user started. It is a point in time, so End and Duration show “—”. |
A session ends when the agent signs out (or is signed out), or when a newer session replaces it. A sign-out has no row of its own: it is the End of its Session Start.
When the period has session rows, a Details column describes each one: the IP address, the app and its version, the browser and operating system, whether the softphone was embedded in another page and that page's address (for example https://crm.example.com), and a short session id. For a session that ended, Details adds Ended: signed out or Ended: replaced by session …. For Session Replaced, Details gives the id of the session that replaced it, which matches a Session Start row of the same agent.
Session Start is not the same as the Logged Out status. Logged Out means the agent had no registered device at all, while a session is one softphone: an agent who also has a desk phone or the mobile app registered stays out of Logged Out when one softphone signs out.
One session per user
An agent can have only one QVOICE Platform session at a time. Opening the app again — in another tab, window, computer, or in a CRM that loads the embedded softphone on more than one page — signs the older session out with “New session detected”. This applies to the QVOICE Platform app and to the embedded softphone alike. Repeated Session Start rows a few minutes apart, from the same IP and browser, usually mean the CRM is opening a new softphone each time.
Sessions are recorded from the platform version that introduced them; earlier periods show no session rows.
Queues Activity¶
Description: Call queue performance and wait time analytics. Per-queue stats: calls offered, answered, answer rate, talk time, and connect (ring) times.
Summary metrics:
| Metric | Description |
|---|---|
| Total Queues | Number of queues in the report. |
| Total Calls | Sum of calls offered to all queues. |
| Total Answered | Sum of answered calls. |
| Overall Answer % | (Total Answered / Total Calls) × 100. |
| Total Talk Time | Sum of on-call time across queues. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Name | Queue name. |
| Total Calls | Calls offered to this queue. |
| Answered Calls | Calls answered from this queue. |
| Answered % | Percentage of offered calls answered. |
| Talked Time | Total time agents spent talking on queue calls. |
| Talked Average | Average talk time per call. |
| Connect Max (s) | Maximum time (seconds) until a call was connected. |
| Avg Connect (s) | Average time until connection. |
Unique number attempts: tick Unique number attempts, next to Apply, then click Apply to count each caller number once for the selected period, however many times it called. Use it to answer "how many leads did we get, how many did we miss and how many did we follow up" when customers call several times.
- The number's latest queue call in the period stands for it. That call decides whether the number counts as answered or abandoned, and which queue row it counts in. A number that was missed in one queue and then answered in another counts once, as answered, in the second queue.
- Total Calls, Answered Calls, Abandoned Calls, the rates, the times, the follow-up columns and the summary cards are all computed over those latest calls, so the queue rows still add up to the cards.
- Numbers are compared digit by digit. The same phone written with and without the country code (for example
+94771234567and0771234567) counts as two numbers. Calls without a caller number are never merged. - Leave the box unticked to count one entry per call, as before.
Calls of a queue: click a queue Name to open the calls behind that row, for the same period. With Unique number attempts applied, the list shows only each number's latest call. Each call shows:
| Column | Description |
|---|---|
| Date & Time | When the call reached the queue, in the report timezone. |
| Caller | Caller number, and the caller name when there is one. |
| Status | Answered, Abandoned, or Left queue (the caller pressed a key to leave the queue). |
| Agent | The agent who answered, with their extension. "—" when nobody answered. |
| Wait | Time the caller waited before an agent answered, or until they hung up. |
| Talk | Talk time of an answered call. |
| Attempts | How many queue calls this number made in the period, to any queue. |
| Followed Up | For a call that was not answered: Yes if it was followed up, No if not. "—" for an answered call, or for a call the Missed Calls report does not include (for example an internal caller). |
| Follow-up In | Follow-up calls where the customer called back. |
| Follow-up Out | Follow-up calls where an agent called the customer. |
| Follow-up Details | One line per follow-up call: when it happened, whether the agent called or the customer called back, who the customer spoke with, and the talk time ("not answered" when the follow-up was not answered). |
A follow-up is matched the same way as in the Missed Calls report. If the follow-ups cannot be loaded for a long period, the list still opens and the follow-up columns show "—". The download button in the window exports the list as CSV.
Calls History¶
Description: Complete call history records for queue (call center) calls. One row per call with queue, parties, ring time, talk time, and disposition.
Detailed data — table columns:
| Column | Description |
|---|---|
| Start Time | When the call entered the queue (timezone-formatted). |
| Queue | Name of the queue. |
| Callee ID Name | Callee display name. |
| Callee ID Number | Callee phone number. |
| Caller ID Name | Caller display name. |
| Caller ID Number | Caller phone number. |
| Ringing (s) | Seconds the call rang before answer or hangup. |
| Talked (s) | Billing/talk seconds (connected time). |
| Disposition | Hangup cause (e.g. NORMAL_CLEARING, NO_ANSWER). |
| Call ID | Unique call identifier. |
Queues Calls¶
Description: Queue-specific call distribution and handling metrics for inbound queue calls. Same data structure as Queues CDRs with direction “inbound”.
Detailed data — table columns (inbound):
| Column | Description |
|---|---|
| Called Time | When the call was presented to the queue. |
| Caller ID Number | Caller’s number. |
| Caller ID Name | Caller’s name. |
| Callee ID Number | Callee/destination number. |
| Agent Name | Agent who answered (if any). |
| Agent Extension | Agent extension. |
| Answered Time | When the call was answered (if answered). |
| Hangup Time | When the call ended. |
| Wait Duration | Time from entry to answer or hangup. |
| Talked Duration | Time in conversation after answer. |
| Queue Name | Queue name. |
| Abandoned | Yes/No — whether the caller hung up before being answered. |
| Queue History | Action to view queue history (e.g. time in queue, overflow). |
| Agent History | Action to view agent attempt history (optional). |
Additional columns may include CSAT, agent disposition, and recording info when available.
Queues Outbound Calls¶
Description: Outbound call queue management and performance. Same structure as Queues CDRs with direction “outbound”; columns are adapted for outbound (e.g. Agent Name, Destination, Answered Time, Hangup Time).
Detailed data — table columns (outbound): Same as Queues Calls but key columns are labeled for outbound context (e.g. Agent Name, Destination, Answered Time, Hangup Time, Wait Duration, Talked Duration, Queue Name, Queue History, Agent History).
Campaigns Activity¶
Description: Marketing campaign call performance and results tracking. One row per campaign call event (lead attempt) with lead info, campaign, agent, status, talk time, SLA, and abandoned flag.
Detailed data — table columns:
| Column | Description |
|---|---|
| Start Time | Event timestamp (timezone-formatted). |
| Lead Name | Lead display name. |
| Lead Number | Lead phone number. |
| Lead Ticket Id | External ticket/CRM ID for the lead. |
| Status | Call/attempt status (e.g. finished_success, lead_call_failed). |
| Campaign | Campaign name. |
| Campaign Type | Type of campaign (e.g. preview, progressive). |
| Agent Name | Agent handling the call. |
| Agent Extension | Agent extension. |
| Agent Talk Time | Duration the agent talked to the lead. |
| Abandoned | Yes/No for progressive campaigns (lead answered but agent did not). |
| Wait Duration (s) | Time lead waited (e.g. in queue or before agent answer). |
| SLA (s) | SLA threshold in seconds (if applicable). |
| Over SLA | Whether the wait exceeded SLA. |
| Agent History | Action to view lead/agent event history. |
Call Reports¶
CDRs¶
Description: Call Detail Records and analytics. System-wide CDRs with caller, callee, destination, duration, ringing, billing seconds, and hangup cause. May include fax metadata and recording references.
Detailed data — table columns:
| Column | Description |
|---|---|
| Datetime | Call timestamp (timezone-formatted). |
| Caller ID Name | Caller display name. |
| Caller ID Number | Caller number. |
| Callee ID Name | Callee display name. |
| Destination | Dialed destination (e.g. SIP to user part). |
| Connected | Billing seconds (billable/connected time). |
| Ringing | Ringing seconds (duration − billing). |
| Result | Hangup cause (e.g. NORMAL_CLEARING). |
| Call ID | Unique call identifier. |
The Answered card counts calls with connected time. A call that ended with a NORMAL_* hangup cause but never connected (for example NORMAL_UNSPECIFIED from a carrier that rejected it) counts as unanswered.
Expandable rows may show fax info (e.g. pages, success, encoding) and recording when present.
Outbound Calls¶
Description: Outbound call analysis and performance metrics. Subset of CDRs or dedicated outbound view: calls placed by users with start time, caller ID, user/extension, dialed number, duration, connected time, and result.
Summary metrics (cards):
| Card | Description |
|---|---|
| Total Calls | Outbound calls placed in the period. |
| Answered | Calls that connected (have connected time), with their share of Total Calls. A call the carrier rejected or that was never picked up is unanswered, even when its hangup cause is NORMAL_UNSPECIFIED or NORMAL_TEMPORARY_FAILURE. This is the same rule All Calls uses, so both reports show the same answered count for the same calls. |
| Unanswered | Total Calls minus Answered. |
| Avg Connected | Connected time averaged over all calls, unanswered ones included. |
| Avg Duration | Average total duration per call, ringing included. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Start Time | When the call started (timezone-formatted). |
| Caller ID Name | Outbound caller ID name. |
| Caller ID Number | Outbound caller ID number. |
| User | User (name) who placed the call. |
| Extension | Extension used. |
| Dialed Number | Number dialed. |
| Duration | Total call duration (seconds). |
| Connected | Billing/connected seconds. |
| Result | Hangup cause. |
Inbound Calls¶
Description: Inbound call analysis and performance metrics. Calls received: start time, caller/callee IDs, destination, duration, connected time, and result.
Detailed data — table columns:
| Column | Description |
|---|---|
| Start Time | Call start time (timezone-formatted). |
| Caller ID Name | Caller display name. |
| Caller ID Number | Caller number. |
| Callee ID Name | Callee display name. |
| Callee ID Number | Callee number. |
| Destination | Destination (e.g. extension or DID) that received the call. |
| Duration | Total duration (seconds). |
| Connected | Billing/connected seconds. |
| Result | Hangup cause. |
Inbound Breakdown¶
Description: Every inbound call from outside the platform in the selected period, each placed in exactly one bucket, so the buckets always add up to the total:
Total inbound = Answered by live agents + Answered by AI + Missed + Answered outside queues
Calls between extensions are not counted. The report checks the sum on screen: the footer writes the addition out and confirms it matches the total.
Filters: date range, timezone, and AI devices: the devices that connect callers to an AI agent. Auto-detect (the default) picks the AI devices of the account; you can pick the devices yourself instead.
Inbound reconciliation:
| Bucket | Description |
|---|---|
| Total inbound | Every inbound call from outside the platform. |
| Answered by live agents | A queue agent took the call. |
| Answered by AI | The call reached an AI device and the AI answered it. This includes calls the queue sent to the AI after no agent answered. |
| Missed | Nobody answered the call. It is split as shown below. |
| — Abandoned in queue, before any agent rang | The caller hung up in the queue before the queue rang any agent, for example while every agent was busy. |
| — Abandoned in queue, after ringing agents | The queue rang one or more agents, nobody answered, and the caller hung up. |
| — Sent to AI, AI did not answer | The call was sent to the AI and the AI did not pick up. |
| — Not answered | The call did not enter a queue and nobody answered it, it went to voicemail, or the caller left the queue by pressing a key. |
| Answered outside queues | The call did not enter a queue and was answered, for example by the auto attendant, a ring group or a user's direct number. |
Under the table, Queue calls that rang an agent counts the calls whose queue rang at least one agent, whatever bucket they ended in. It is the same count as Queue Calls in All Calls counted By call.
Sections:
- Trends: Inbound calls per day (each day's calls by bucket), Calls sent to the AI by hour, and AI session length.
- Live agents: Answered by live agents, per agent: Answered, Talk time, Avg talk and Share.
- AI and missed calls: AI totals (Answered by AI, AI talk time, AI sessions, Calls with extra sessions, Handed off to agent, Transferred to AI by an agent), Why calls went to the AI, AI failures, Missed (the four missed lines above, as a share of missed calls), AI calls and AI missed calls.
Downloads: the summary as CSV, and the AI calls as CSV.
Comparing All Calls with Inbound Breakdown¶
The two reports count different things, so their totals are not expected to be equal:
- Inbound Breakdown counts every inbound call that reached the platform.
- All Calls counts a call only once it has rung a user. By call counts each such call once; By user counts it once for every agent it rang.
To compare them, open All Calls with Count = By call, Direction = Inbound and Network = Off-net, for the same date range and timezone.
Example. A day with 200 inbound calls:
| Inbound Breakdown | Calls |
|---|---|
| Total inbound | 200 |
| Answered by live agents | 120 |
| Answered by AI | 0 |
| Missed | 50 |
| — Abandoned in queue, before any agent rang | 12 |
| — Abandoned in queue, after ringing agents | 34 |
| — Sent to AI, AI did not answer | 0 |
| — Not answered | 4 |
| Answered outside queues | 30 |
| Queue calls that rang an agent | 154 |
Of the 30 calls answered outside queues, 6 were answered by users on their direct numbers and 24 by the auto attendant. Of the 4 not answered, 1 rang a user directly and 3 ended in the menu.
The same day in All Calls, By call, Inbound, Off-net:
| All Calls card | Calls | Where it comes from |
|---|---|---|
| Queue Calls | 154 | Queue calls that rang an agent: 120 answered + 34 abandoned after ringing agents. |
| Direct Calls | 7 | 6 answered on a direct number + 1 that rang a user and was not answered. |
| Customer Calls | 161 | 154 + 7. |
| Answered | 126 | 120 by queue agents + 6 on direct numbers. |
| Unanswered | 35 | 34 queue calls + 1 direct call. |
The 39 calls in Inbound Breakdown but not in All Calls (200 − 161) never rang a user: 12 abandoned in the queue before any agent rang, 24 answered by the auto attendant and 3 that ended in the menu.
A queue call that rang agents and then went to the AI counts as Answered by AI in Inbound Breakdown and as an unanswered queue call in All Calls, because no user answered it.
Outbound Breakdown¶
Description: Every outbound call of the selected period, each placed in exactly one bucket by its outcome, so the buckets always add up to the total:
Total outbound = Answered + Cancelled by the agent + Rejected by the network + Busy + No answer + Early media only + Barred
The report checks the sum on screen: the footer writes Answered + not answered = Total out and confirms it matches.
Filters: date range, timezone, and Network: Off-net only (the default) counts the calls placed through the carrier; On-net only counts calls between extensions; All networks counts both.
Outbound calls by outcome:
| Bucket | Description |
|---|---|
| Total outbound | Every outbound call in the period. |
| Answered | The call connected (it has connected time). The same rule All Calls and Outbound Calls use. |
| — Under 5 seconds | Answered calls with less than 5 seconds of connected time. Part of Answered. |
| Not answered | Every call that did not connect, split as below. |
| — Cancelled by the agent | The agent hung up before the other side answered. |
| — Rejected by the network | The carrier did not complete the call: unreachable or failed number, rejected, no route, invalid number. A call that ended with a "normal" hangup cause but never connected is counted here. |
| — Busy | The number was busy. |
| — No answer | It rang and nobody picked up. |
| — Early media only | Only a carrier announcement played (for example "the number is not available"); the call never connected. |
| — Barred | Blocked by an outgoing call restriction. |
Campaign calls. When the account runs dialer campaigns, the table shows three columns: Agent calls, Campaign calls and Total. Campaign calls are summarised here only; the campaign reports have their detail. The sections below cover the agents' own calls.
Carrier retries. When the first carrier route rejects a call and it is retried on the next route, the call leaves more than one carrier attempt. Outbound Breakdown counts it once: as answered if any attempt connected, otherwise by its last attempt. The line under the filters says how many retries were counted this way.
Sections:
- Outbound calls per day: each day's calls stacked by outcome, agent and campaign calls together.
- By agent: per user, Calls, Answered, Answer rate, Cancelled, Talk time and Avg talk, with a footer that matches the Agent calls column.
- Numbers with the most unanswered attempts: destinations users dialed more than once without connecting (top 20), with the last attempt.
- Rejections by cause: the hangup causes behind Rejected by the network, to raise with the carrier.
Downloads: the summary as CSV, and every call with the bucket it landed in as CSV (Calls).
Comparing Outbound Breakdown with All Calls¶
With Network = Off-net only, the total equals All Calls with Count = By call, Direction = Outbound and Network = Off-net, for the same date range and timezone: both count each call placed through the carrier once. The Compare with other reports panel in All Calls checks this for you.
Billing Reports¶
Usage Charges¶
Description: Usage-based charging and billing information. Per-call (or per-leg) records with extension, direction, duration, rate, and amount. Can be filtered by extension and tags.
Summary metrics: Total calls, total amount, and total minutes are often shown at the top (from API or client aggregation).
Detailed data — table columns:
| Column | Description |
|---|---|
| Start Time | Call start time (timezone-formatted). |
| Extension | Extension that incurred the charge. |
| Tags | Tags associated with the extension or call. |
| Caller ID Name | Caller name. |
| Caller ID Number | Caller number. |
| Direction | Inbound or Outbound. |
| Callee ID Name | Callee name. |
| Callee ID Number | Callee number. |
| Duration | Billing increment (e.g. formatted minutes or seconds). |
| Rate | Rate applied (e.g. per minute). |
| Amount | Charge amount for the call. |
Users Charges¶
Description: User-specific charges and billing details. Aggregated per user/extension: total calls, inbound/outbound split, minutes, and amount. Filterable by tags.
Summary metrics: Often total users, total calls, total amount, total minutes.
Detailed data — table columns:
| Column | Description |
|---|---|
| User | User display name. |
| Extension | Extension number. |
| Tags | Tags assigned to the user/extension. |
| Total Calls | Total billable calls. |
| Inbound Calls | Inbound call count. |
| Outbound Calls | Outbound call count. |
| Minutes | Total billable minutes. |
| Amount | Total charge amount for the user. |
Total Charges Per Account¶
Description: Account-level charging and billing summary. One row per child account (or account segment) with total amount, total calls, and total minutes.
Summary metrics:
| Metric | Description |
|---|---|
| Total Accounts | Number of accounts in the list. |
| Total Amount | Sum of all account amounts. |
| Total Calls | Sum of calls across accounts. |
| Total Minutes | Sum of minutes. |
| Avg Amount Per Account | Total amount ÷ number of accounts. |
Detailed data — table columns:
| Column | Description |
|---|---|
| Account Name | Name of the account. |
| Total Amount | Total billing amount for the account. |
| Total Calls | Total calls for the account. |
| Total Minutes | Total billable minutes. |
Other Reports¶
Audit Logs¶
Description: System audit trails and security logs. API (or application) requests with timestamp, endpoint, method, payload, headers, user, response code, and IP.
Detailed data — table columns:
| Column | Description |
|---|---|
| Datetime | When the request occurred (timezone-formatted). |
| Endpoint | API or application endpoint (e.g. path). |
| Method | HTTP method (GET, POST, PUT, PATCH, DELETE). |
| Payload | Request body (e.g. JSON); often viewable in a modal. |
| Headers | Request headers; often viewable in a modal. |
| User | User who performed the action (e.g. name/extension from token). |
| Response Code | HTTP response status code (e.g. 200, 404). |
| IP Address | Client IP address. |
Report Custom¶
Description: Custom report builder and analytics. This section is reserved for future custom reports; the dashboard structure is in place and the report will be implemented in a later release.
Common Concepts¶
- Timezone: All reports allow selecting a timezone; timestamps in tables and charts are shown in that timezone unless stated otherwise.
- Date range: Reports are filtered by a start and end date/time; quick presets (e.g. Last 7 days, This month) are available.
- Direction: Inbound = calls received; Outbound = calls placed. Some reports let you filter by direction.
- Billing seconds / Connected: Time in seconds for which the call is billable (typically from answer to hangup). Ringing is usually total duration minus billing seconds.
- Hangup cause / Disposition / Result: SIP or carrier reason for call end (e.g. NORMAL_CLEARING, NO_ANSWER, USER_BUSY).
This documentation reflects the reports and fields available in the Analytics Hub UI and associated APIs. For API details (endpoints, parameters, response shapes), refer to the backend API documentation.